Identifying common call quality issues

When it comes to call quality, there are many variables and factors that can cause disruption.

Audio is cutting out

You might be experiencing packet loss. When one or more packets of data traveling across a network fail to reach their destination, it will cause lost data transmission bits. This needs to be 0, usually expressed as a percentage (0%).

There is a voice delay

You might be experiencing latency. Latency - sometimes referred to as "lag," which causes interruptions—similar to lag in video games or video streaming. This needs to be less than 100ms.

Generalized degraded quality

You may be experiencing packet loss, latency, or jitter. Jitter, which is slightly different from latency, is a variation in delayed of received packets. Jitter and latency can be caused by network congestion, wireless network connections, and old/damaged hardware.

• Each concurrent call needs to have 80 kbit/s of bandwidth available (both upstream and downstream).

No audio or static audio

• Check to make sure you turn your volume up.
• Check to make sure you plug in your headset or handset into the correct port.
• Try testing another headset/handset/speakerphone on your phone and the headset/handset on another phone to confirm if this is the problem.
• Firewall RTP ports closed.

TIPS!

• Don't put anything directly in front of your phone if you plan on using the speaker. The mic is located in the front at the bottom, and this will block out the sound.
• Play around with the volume controls.
• Ensure you have a good quality headset if you use one; sometimes sound issues have nothing to do with connectivity and everything to do with a faulty headset.
• Try reducing the amount of bandwidth you are using while on a call if your Task Manager (Windows) or Activity Monitor (Mac) can show you which applications you may want to restrict before a scheduled phone call!

If your problem persist

Need help with your configuration?

If you are unable to complete the setup, contact us at itis.cmsupport@softtek.com. Please provide the following information to help us troubleshoot and resolve your case:

Network Details: Your Public IPv4 address. You can find this by visiting https://checkip.amazonaws.com/.

MicroSIP Configuration: Please provide screenshots of the following:

• Main Interface (the dialpad view).
• Settings Menu (Press Ctrl + P).
• Account Settings (Press Ctrl + M).

Call Manager: A screenshot of the My IP Upload module.

Issue Description: A brief summary of the error or specific behavior you are experiencing.