MicroSIP datasheet

MicroSIP is a SIP softphone based on the PJSIP stack available for Microsoft Windows. It facilitates high quality VoIP calls based on the open SIP protocol.

IP Ports and Protocols used by SIP Devices. The following ports are associated with a successful communication:

IP Ports and Protocols used by SIP Devices
Trust Over IP	Port	Type	Description
SIP Server Ex. 192.168.1.1	5060	UDP	SIP endpoints
SIP Server Ex. 192.168.1.1	10000:65000	UDP	RTP/SRTP Media

A security group controls the traffic that is allowed to our IP; reach and leave the resources that it is associated with.

General

Softphone usage modes

Single call mode - single window, basic functionality. Enabled by default.

Extended mode - two windows, multiple calls, conferences, attended transfers.

Communication types

Calls through SIP server / PBX - select "Add Account" after installing.

Direct calls by IP address (or domain name). Works out of the box, using the "Local Account".

After automatic startup or when you close the main window MicroSIP will be minimized to the system tray.

MicroSIP does not require the installation of additional libraries, runtimes or frameworks.

Dialpad

Mainly used for dialing or sending dual tones (DTMF). Various input formats are supported.

Examples

1-800-567-46-57

1234

1234@sip.server.com

1234@sip.server.com:5043

192.168.0.55

Or even complete SIP URI with optional microsip extensions

"Name" <sip:extension@sip.microsip.org;parameter1=xxx?Custom-Header=yyy>,dtmf_sequence

There is sound quality indication