Issabel disconnects me several times a day: Difference between revisions

From Call Manager Support
Jump to navigation Jump to search
No edit summary
No edit summary
 
(20 intermediate revisions by 2 users not shown)
Line 6: Line 6:
*The same disconnections: It could be a network problem.
*The same disconnections: It could be a network problem.


==Solution==
==Solutions==
*Connect to Issabel using Chrome.




{{ContacUs}}
*A lot of internet issues can be remedied quickly by simply restarting your modem/router. It’s an easy fix that’s always worth a shot. To restart your modem and router, unplug the power cable for 10 seconds and plug it back in. The equipment will take a few minutes to reboot. It’s also a good idea to restart the device you’re using.
 
 
*If you’re on Wi-Fi, try plugging your computer directly into your router with an Ethernet cable. This is the tried and true way to differentiate signal issues from Wi-Fi issues. Connect the Ethernet cable to the port on your computer, and plug the other end into one of the LAN ports on your router (these are usually yellow). Connecting the computer directly to the single port on a modem bypasses essential security measures built into the router.
 
 
*If you are in Softtek's network re-plug the cable that goes to the jack and your computer; reboot your computer in case you have pending updates.
 
 
*Use MicroSip manual to check if your configuration is OK: [[MicroSIP_Setup_Manual]]
 
 
*If your problem persist, check the next article: [[Identifying_common_call_quality_issues]]
 


[[Category:FAQ]]
[[Category:FAQ]]

Latest revision as of 18:56, 29 April 2024

I have an issue with my Issabel / Agent console it disconnects me every X time.

Cause

  • Fewer disconnections: It probably is a performance computer problem.
  • The same disconnections: It could be a network problem.

Solutions

  • Connect to Issabel using Chrome.


  • A lot of internet issues can be remedied quickly by simply restarting your modem/router. It’s an easy fix that’s always worth a shot. To restart your modem and router, unplug the power cable for 10 seconds and plug it back in. The equipment will take a few minutes to reboot. It’s also a good idea to restart the device you’re using.


  • If you’re on Wi-Fi, try plugging your computer directly into your router with an Ethernet cable. This is the tried and true way to differentiate signal issues from Wi-Fi issues. Connect the Ethernet cable to the port on your computer, and plug the other end into one of the LAN ports on your router (these are usually yellow). Connecting the computer directly to the single port on a modem bypasses essential security measures built into the router.


  • If you are in Softtek's network re-plug the cable that goes to the jack and your computer; reboot your computer in case you have pending updates.